Common Problems with Commercial Roller Shutter Doors and How to Fix Them

Commercial roller shutter doors are integral to the security and functionality of many businesses, providing a robust barrier against unauthorised access and environmental elements. However, like any mechanical system, they can experience issues over time. Understanding common problems and knowing how to fix them can save time and money, ensuring your doors operate efficiently. Here’s a look at some typical issues with commercial roller shutters and their practical solutions.

Sticking or Jamming

One of the most frequent issues with commercial roller shutter doors is sticking or jamming during operation. This can be caused by a buildup of dirt in the tracks, misalignment of the door, or lack of lubrication. To fix a sticking door, first clean the tracks with a brush to remove any dust. Check the alignment and adjust if necessary. Regularly lubricating the tracks of the roller shutter with a lubricant can prevent this problem from recurring.

Unusual Noises

Squeaking or grinding noises when operating commercial roller shutters are common indicators of a problem. These sounds typically result from insufficient lubrication, worn rollers, or loose hardware. To resolve this, lubricate all moving parts regularly. If the noise persists, inspect the rollers and hinges for wear and tear and replace any worn components. Tightening any loose bolts or screws can also help reduce noise and ensure smoother operation.

Problems with Opening or Closing

If your commercial roller shutter doors are struggling to open or close, it could be due to an issue with the motor or the manual override system. For motorised doors, check the motor’s power supply and connections. Sometimes, a simple reset of the motor can restore normal function. For manual doors, ensure that the chain or handle is not damaged and operates freely. In both cases, professional assistance may be necessary if the problem involves electrical components or complex mechanical repairs.

Damage to Slats or Panels

Damage to slats or panels of commercial roller shutters can compromise both the security and aesthetic appeal of the doors. Impact from vehicles, vandalism, or wear and tear can cause this damage. Depending on the extent of the damage, slats or panels may need to be straightened or replaced. Regular inspections can help identify damage early, allowing for timely repairs that maintain the integrity and appearance of the doors.

Remote Control Malfunctions

For commercial roller shutter doors operated by remote control, malfunctions can occur due to issues with the remote itself or the receiver. First, check the remote control’s batteries and replace them if necessary. If the remote still fails to operate the door, reset the receiver or reprogram the remote according to the manufacturer’s instructions. If these steps don’t resolve the issue, the remote or receiver may need to be replaced.

Need Professional Help?

If you’re unable to fix your commercial roller shutter doors on your own, now is the time to contact our company. We offer comprehensive maintenance and repairs in addition to professional installation for commercial roller shutters across England.

Get in touch with us, for all your roller shutter needs!